- Azimilide
-
- $1.00 / 1g
-
2025-01-03
- CAS:149888-94-8
- Min. Order: 1g
- Purity: 99%
- Supply Ability: 50tons
|
| | azimilide Basic information |
| Product Name: | azimilide | | Synonyms: | 2,4-Imidazolidinedione, 1-(((5-(4-chlorophenyl)-2-furanyl)methylene)amino)-3-(4-(4-methyl-1-piperazinyl)butyl)-, dihydrochloride;Azimilide HCl;Azimilide hydrochloride;Unii-6E6vjp68kr;AziMilide Dihydrochloride;NE-10064 Dihydrochloride;1-[[[5-(4-Chlorophenyl)-2-furanyl]methylene]amino]-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-imidazolidinedione dihydrochloride;Azimilide 2HCl | | CAS: | 149888-94-8 | | MF: | C23H29Cl2N5O3 | | MW: | 494.42 | | EINECS: | | | Product Categories: | Aromatics, Heterocycles, Pharmaceuticals, Intermediates & Fine Chemicals | | Mol File: | 149888-94-8.mol |  |
| | azimilide Chemical Properties |
| storage temp. | 2-8°C | | solubility | DMSO: soluble1mg/mL, clear (warmed) | | form | powder | | color | white to beige |
| Hazard Codes | T | | Risk Statements | 25 | | Safety Statements | 45 | | RIDADR | UN 2811 6.1 / PGIII | | WGK Germany | 3 |
| | azimilide Usage And Synthesis |
| Originator | Stedicor,Procter and Gamble | | Uses | Azimilide Dihydrochloride is an oral type III potassium channel blocker agent that blocks both the rapid activating component and the slow activating component of the delayed rectifier potassium current. Both preclinical and clinical studies have demonstrated the efficacy of azimilide and its safety in the treatment of supraventricular and ventricular tachyarrhythmia. Azimilide also is being studied in a worldwide multicenter trial for prevention of sudden cardiac death in patients after myocardial infarction. | | Uses | Azimilide dihydrochloride may be used in the electrophysiology experiments with human ether-a-go-go-related gene 1a (HERG1a) subunit. | | Manufacturing Process | 1-Phenylmethylenamino-3-(4-chlorobutyl)-2,4-imidazolidinedione
dihydrochloride is prepared by adding 60% sodium hydride in mineral oil (7.8
g, 0.1944 mole) over 1 h to a stirred solution o f 1-
(benzy1ideneamino)hydantoin [prepared as described by J. Gut, A Novacet,
and P. Fiedler, Coll. Czech. Chern. Comrnun., Vol. 33, pp. 2087-2096, No. 71,
1968] (39.5 g , 0.1944 mole) in dimethyl formamide (1000 ml). After
complete addition, the solution is heated at steam bath temperature
(approximately 100°C) for 1.5 h. The resulting mixture is allowed to cool to
room temperature (30°C).
While stirring at room temperature, 1-bromo-4-chlorobutane (100 g ,0.5832
mole, 3 eq.) is added in one portion. The mixture becomes exothermic
reaching around 35°C in approximately 30 min. The near-solution is heated a
t approximately 80°C by steam bath for 4 h, cooled and stirred for
approximately 8 h at room temperature (30°C). The cloudy mixture is filtered,
removing a small amount of insoluble solid. The filtrate is concentrated under
reduced pressure to a semi-solid residue. This residue is triturated with H2O
(400 ml), collected, recrystallized from acetonitrile, and then air-dried to give
43.1 g (0.1467 mole) of 1-phenylmethyleneamino-3-(4-chlorobutyl)-2,4-
imidazolidinedione.
A mixture of 1-phenylmethyleneamino-3-(4-chlorobutyl)-2,4-
imidazolidinedione (43.1 g, 0.1467 mole), acetone (1200 ml) and sodium
iodide (48.4 9, 0.3227 mole) is heated to reflux. Reflux is maintained for 5 h.
The mixture is filtered, collecting the insoluble. The filtrate is recharged with
sodium iodide (10.0 g) and reflux is resumed and is maintained for 15 h. After
cooling to room temperature, the mixture is filtered, removing the insoluble
NaCl (total recovery, 9.5 g, 110%). The filtrate is poured into H2O (2000 ml)
while stirring. After stirring for 30 min, the solid is collected and air-dried to
yield 51.5 g (0.1337 mole) of 1-phenylmethyleneamino-3-(4-iodobutyl)-2,4-
imidazolidinedione.
A solution of 1-phenylmethyleneamino-3-(4-iodobutyl)-2,4-imidazolidinedione
(10.0 g, 0.0260 mole), dimethylformamide (150.0 mg) and 1-
methylpiperazine (11.5 ml, 10.4 9, 0.1040 mole) is heated to reflux. Reflux is
maintained for 3 h. After cooling to approximately 40°C, the solution is
concentrated under reduced pressure by rotary evaporator to an oily-solid
residue. This residue is dissolved in H2O (200 ml) then made basic with
saturated NaHCO3 (200 ml). The resulting mixture is stirred for 2 h. The solid
is collected and air-dried, and is next dissolved in absolute ethanol (150 ml),
next filtered, then made acidic to wet litmus with EtOH/HCl. After cooling
several hours, the solid is collected and air-dried to give 8.04 g (0.0187 mole)
of 1-phenylmethyleneamino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-
imidazolidinedione dihydrochloride.
A mixture of 1-phenylmethyleneamino-3-[4-(4-methyl-1-piperazinyl)butyl]-
2,4-imidazolidinedione dihydrochloride (8.04 g, 0.0187 mole), 2 N HCl (125
ml) and 5% Pd/C: 50% H2O (1.5 g) is subjected to hydrogen on a Parr
apparatus at 40 psi at room temperature. After 2 h, the catalyst is removed
by filtration. The filtrate is divided into two equal portions. Each is
concentrated under reduced pressure on a rotary 10 evaporator to an oily
residue of 1-amino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-imidazolidinedione
hydrochloride.
A solution of 1-amino-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-
imidazolidinedione hydrochloride (0.0094 mole), dimethylformamide (75 ml)
and 5-(4-chlorophenyl)-2-furancarboxaldehyde [prepared as described in U.S.
Patent No. 20 4,882,354, to Huang et al., assigned to Norwich Eaton
Pharmaceuticals, Inc., issued November 21, 1984, see Cols. 7 and 8] (1.94 g
, 0.0094 mole) is stirred at room temperature for 72 h. The mixture is
filtered, collecting the solid. Recrystallization from absolute ethanol/H2O and
air-drying gives 2.63 g (0.0050 mole) of 1-[[[5-(4-chlorophenyl)-2-
furanyl]methylene]amino]3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-
imidazolidinedion hydrochloride.
1-[[[5-(4-Chlorophenyl)-2-furanyl]methylene]amino]-3-[4-(4-methyl-1-
piperazinyl)butyl]-2,4-imidazolidinedione hydrochloride, (6.56 g, 0.0124 mole)
is dissolved in H2O (300 ml) and washed with (1x100 ml). The aqueous phase
is made basic with saturated NaHCO3 solution. The resulting mixture is
extracted with CH2Cl2 (4x100 ml). The extract is washed with saturated NaCl
(2x50 ml), dried over MgSO4 (activated charcoal), filtered and concentrated
under reduced pressure to a solid residue. This solid is triturated in anhydrous
ether, collected and air-dried. Recrystallization once from absolute EtOH and
then from toluene (activated charcoal), next washing with anhydrous ether
and air drying gives 2.05 g (0.0045 mole) of 1-[[[5-(4-chlorophenyl)-2-
furanyl]methylene]amino]-3-[4-(4-methyl-1-piperazinyl)butyl]-2,4-
imidazolidinedione. | | Therapeutic Function | Antiarrhythmic | | Biochem/physiol Actions | Azimilide is an inhibitor of human ether-a-go-go-related gene (HERG) channel. It displays a decrease in inhibitory effect in acidic pH conditions. | | storage | Store at -20°C |
| | azimilide Preparation Products And Raw materials |
|