| Identification | More | [Name]
Rhodium(III) sulfate | [CAS]
10489-46-0 | [Synonyms]
dirhodium trisulphate
RHODIUM(III) SULFATE
RHODIUM SULFATE
rhodium(iii)sulfatesolution
sulfuricacid,rhodium(3++)salt(3:2)
Rhodium plating solution
Rhodium (III) sulphate-solution
RHODIUM(III) SULFATE SOLUTION, CA. 8% (W T/WT) RH IN WATER
Rhodium Sulphate
RhodiumSulfateSolution
rhodium(iii) sulfate, bright plating solution
RHODIUM SULPHATE(SOLUTION)
Rhodium(III) sulfate, bright plating solution, Rh 5% (cont. Rh)
RJ100S (Rhodium Sulphate) This sulphate based concentrate has been specially developed for decorative applications. It will produce bright, white lustrous deposits up to a maximum thickness of 2.5.
Rhodium (III) sulfate, Premion, 99.99% (metals basis), Rh 41.2% min
Rhodium salfate
Dirhodium trisulfate | [EINECS(EC#)]
234-014-5 | [Molecular Formula]
O12Rh2S3 | [MDL Number]
MFCD00016309 | [Molecular Weight]
494 | [MOL File]
10489-46-0.mol |
| Chemical Properties | Back Directory | [Description]
When heated to decomposition, this product can emit acid mists and toxic gases (including
oxides of sulphur and rhodium compounds). This product is not compatible with bases,
halides, water, cyclopentadiene, cyclopentanone, oxime, nitroaryl amines, haxalithium disilicide,
phosphorus (III) oxide, chlorine bromine pentafluoride, trifluoride, and oxygen difluoride
(OF2). Avoid contact with metals. This product can react with water to generate heat. | [Melting point ]
decomposes at >500℃ [KIR82] | [Boiling point ]
99℃[at 101 325 Pa] | [density ]
1.217 g/mL at 25 °C(lit.)
| [vapor pressure ]
21.4hPa at 20℃ | [RTECS ]
FF9335000 | [storage temp. ]
under inert gas (nitrogen or Argon) at 2-8°C | [form ]
red-yellow solid | [color ]
red-yellow | [Water Solubility ]
Miscible with water, ethanol and with a 3:1 ethanol/water mixture. | [Exposure limits]
ACGIH: TWA 0.2 mg/m3
OSHA: TWA 1 mg/m3
NIOSH: IDLH 15 mg/m3; TWA 1 mg/m3 | [CAS DataBase Reference]
10489-46-0(CAS DataBase Reference) | [EPA Substance Registry System]
10489-46-0(EPA Substance) |
| Hazard Information | Back Directory | [Chemical Properties]
reddish yellow solid; ~8% aqueous solution [ALD94] [KIR82] | [Uses]
Rhodium(III) sulfate is used as plating reagents and additives for noble metal. It is also used for fancy plating rhodium in jewellery and horologe. Further, it is used for decorative applications. | [General Description]
Rhodium(III) sulfate is an anhydrous metal sulfate that is formed by oxidizing rhodium with concentrated sulphuric acid. It is a red crystal that forms a hydrated solution at high temperatures. It is majorly used in the production of high performance coatings by electroplating technique. |
| Safety Data | Back Directory | [Hazard Codes ]
O,T | [Risk Statements ]
R49:May cause cancer by inhalation.
R8:Contact with combustible material may cause fire.
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R34:Causes burns. | [Safety Statements ]
S53:Avoid exposure-obtain special instruction before use .
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . | [RIDADR ]
UN3264 | [WGK Germany ]
3 | [TSCA ]
Yes | [HazardClass ]
8 | [PackingGroup ]
III |
|
|